Evening All,
Am hoping someone would be kind enough to help.
I have been using PICoreplayer on a PI zero W with an amp hat in my kitchen and its been great, and thought a really great addition would be to add a touchscreen, remembering I had a 7" one from a previous CarPC project that never got to completion a few years ago.
Its this one, https://www.cartft.com/catalog/il/1110. and have it connected to the PI Zero by the HDMI out via a VGA converter. All seems well on the display front and I can see Jivelite output etc. and everything seems scaled properly using the joggler skin
The only thing that isn't working properly is the touchscreen functionality, it works, but the calibration is way out, and that is where I get stuck. I've tried reading around especially the recent https://forums.slimdevices.com/showt...n-piCorePlayer post, but it seems to be going over my head, not sure if I should be blindly follow the PDF instructions or not as it seems while a HDMI/USB screen its smaller.
Any pointers, instructions anyone could throw my way would be gratefully received
Many thanks
the output of cat /proc/bus/input/devices shows the below if it helps:
I: Bus=0003 Vendor=0eef Product=0001 Version=0210
N: Name="eGalax Inc. USB TouchController"
P: Phys=usb-20980000.usb-1/input0
S: Sysfs=/devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.0/0003:0EEF:0001.0002/input/input2
U: Uniq=
H: Handlers=mouse0 event0 js0
B: PROP=0
B: EV=1b
B: KEY=30000 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0003 Vendor=0eef Product=0001 Version=0210
N: Name="eGalax Inc. USB TouchController"
P: Phys=usb-20980000.usb-1/input0
S: Sysfs=/devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.0/0003:0EEF:0001.0002/input/input3
U: Uniq=
H: Handlers=mouse1 event1
B: PROP=0
B: EV=1b
B: KEY=401 0 0 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10
Am hoping someone would be kind enough to help.
I have been using PICoreplayer on a PI zero W with an amp hat in my kitchen and its been great, and thought a really great addition would be to add a touchscreen, remembering I had a 7" one from a previous CarPC project that never got to completion a few years ago.
Its this one, https://www.cartft.com/catalog/il/1110. and have it connected to the PI Zero by the HDMI out via a VGA converter. All seems well on the display front and I can see Jivelite output etc. and everything seems scaled properly using the joggler skin
The only thing that isn't working properly is the touchscreen functionality, it works, but the calibration is way out, and that is where I get stuck. I've tried reading around especially the recent https://forums.slimdevices.com/showt...n-piCorePlayer post, but it seems to be going over my head, not sure if I should be blindly follow the PDF instructions or not as it seems while a HDMI/USB screen its smaller.
Any pointers, instructions anyone could throw my way would be gratefully received
Many thanks
the output of cat /proc/bus/input/devices shows the below if it helps:
I: Bus=0003 Vendor=0eef Product=0001 Version=0210
N: Name="eGalax Inc. USB TouchController"
P: Phys=usb-20980000.usb-1/input0
S: Sysfs=/devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.0/0003:0EEF:0001.0002/input/input2
U: Uniq=
H: Handlers=mouse0 event0 js0
B: PROP=0
B: EV=1b
B: KEY=30000 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10
I: Bus=0003 Vendor=0eef Product=0001 Version=0210
N: Name="eGalax Inc. USB TouchController"
P: Phys=usb-20980000.usb-1/input0
S: Sysfs=/devices/platform/soc/20980000.usb/usb1/1-1/1-1:1.0/0003:0EEF:0001.0002/input/input3
U: Uniq=
H: Handlers=mouse1 event1
B: PROP=0
B: EV=1b
B: KEY=401 0 0 0 0 0 0 0 0 0 0
B: ABS=3
B: MSC=10