Hi,
I loaded audiolinux on a nuc a week ago & fired up Squeezelite-R2, and for three days it ran without any problem. Then it stopped working.
The NUC is connected to a DDC via USB.
If I play a file from my LMS server using the NUC I hear nothing. Nothing obvious in the logs - at least to my untrained eyes.
If a have the service running and try:
squeezelite -n LR-NUC -s xxx.xxx.xxx.xxx -d all=debug
The IP address being that of my LMS server, it errors saying the resource is busy.
If I kill the service then the command will run produce output (below).
If I try a speaker-test it runs, but I hear nothing from the speakers.
Any advice??
Thanks,
M
Outputs:
squeezelite -n LR-NUC -s xxx.xxx.xxx.xxx -d all=debug
[20:27:20.414486] stream_init:290 init stream
[20:27:20.414608] stream_init:291 streambuf size: 2097152
[20:27:20.416789] output_init_alsa:889 init output
[20:27:20.416807] output_init_alsa:930 device : default requested alsa_buffer: 40 alsa_period: 4 format: any mmap: 1
[20:27:20.416823] output_init_common:346 outputbuf size: 3528000
[20:27:20.416871] output_init_common:370 idle timeout: 0
[20:27:20.417866] output_init_common:410 supported rates: 768000 705600 384000 352800 192000 176400 96000 88200 48000 44100
[20:27:20.424408] output_init_alsa:946 memory locked
[20:27:20.424612] output_thread:697 open output device: default
[20:27:20.424616] output_init_alsa:969 set output sched fifo rt: 45
[20:27:20.425248] alsa_open:367 opening device at: 44100
[20:27:20.425263] decode_init:129 init decode, include codecs: exclude codecs:
[20:27:20.425412] alsa_open:440 opened device default using format: S32_LE sample rate: 44100 mmap: 1
[20:27:20.425445] alsa_open:531 buffer: 40 period: 4 -> buffer size: 1764 period size: 441
[20:27:20.425834] load_faad:610 loaded libfaad.so.2
[20:27:20.425851] register_faad:640 using faad to decode aac
[20:27:20.426535] load_vorbis:300 loaded libvorbisfile.so.3
[20:27:20.426552] register_vorbis:329 using vorbis to decode ogg
[20:27:20.427141] load_flac:266 loaded libFLAC.so.8
[20:27:20.427158] register_flac:294 using flac to decode flc
[20:27:20.427173] register_pcm:424 using pcm to decode aif,pcm
[20:27:20.427475] load_mad:383 loaded libmad.so.0
[20:27:20.427503] register_mad:412 using mad to decode mp3
[20:27:20.427769] slimproto:849 connecting to xxx.xxx.xxx.xxx:3483
[20:27:20.428029] slimproto:882 connected
[20:27:20.428048] sendHELO:124 mac: 94:c6:91:1b:4d:22
[20:27:20.428091] sendHELO:126 cap: Model=squeezelite,AccuratePlayPoints=1,HasDigitalO ut=1,HasPolarityInversion=1,Firmware=v1.8.4 (R2),ModelName=SqueezeLite-R2,MaxSampleRate=768000,aac,ogg,flc,aif,pcm,mp3
[20:27:20.429616] process:494 strm
[20:27:20.429631] process_strm:256 strm command q
.....etc
systemctl status squeezelite@audiolinux
● squeezelite@audiolinux.service - Squeezelite Service
Loaded: loaded (/usr/lib/systemd/system/squeezelite@.service; enabled; vendor preset: disabled)
Active: active (running) since Sun 2018-11-11 20:32:06 CET; 2s ago
Main PID: 13967 (squeezelite)
Tasks: 4 (limit: 4915)
Memory: 6.7M
CGroup: /system.slice/system-squeezelite.slice/squeezelite@audiolinux.service
└─13967 /usr/bin/squeezelite -o front:CARD=U20F1,DEV=0
Nov 11 20:32:06 audiolinux systemd[1]: Started Squeezelite Service.
Squeezelite -l:
Output devices:
null - Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=U20F1 - USB Audio 2.0(F1), USB Audio - Default Audio Device
front:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - Front speakers
surround21:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 4.0 Surround output to Front and Rear speakers
surround41:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - IEC958 (S/PDIF) Digital Audio Output
sysdefault:CARD=PCH - HDA Intel PCH, ALC233 Analog - Default Audio Device
front:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - Front speakers
surround21:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Digital - IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=PCH,DEV=0 - HDA Intel PCH, HDMI 0 - HDMI Audio Output
hdmi:CARD=PCH,DEV=1 - HDA Intel PCH, HDMI 1 - HDMI Audio Output
hdmi:CARD=PCH,DEV=2 - HDA Intel PCH, HDMI 2 - HDMI Audio Output
hdmi:CARD=PCH,DEV=3 - HDA Intel PCH, HDMI 3 - HDMI Audio Output
hdmi:CARD=PCH,DEV=4 - HDA Intel PCH, HDMI 4 - HDMI Audio Output
cat /proc/asound/modules
0 snd_usb_audio
1 snd_hda_intel
fuser -fv /dev/snd/* /dev/dsp*
Specified filename /dev/dsp* does not exist.
USER PID ACCESS COMMAND
/dev/snd/pcmC0D0p: audiolinux 10092 F...m squeezelite
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: U20F1 [USB Audio 2.0(F1)], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC233 Analog [ALC233 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC233 Digital [ALC233 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
I loaded audiolinux on a nuc a week ago & fired up Squeezelite-R2, and for three days it ran without any problem. Then it stopped working.
The NUC is connected to a DDC via USB.
If I play a file from my LMS server using the NUC I hear nothing. Nothing obvious in the logs - at least to my untrained eyes.
If a have the service running and try:
squeezelite -n LR-NUC -s xxx.xxx.xxx.xxx -d all=debug
The IP address being that of my LMS server, it errors saying the resource is busy.
If I kill the service then the command will run produce output (below).
If I try a speaker-test it runs, but I hear nothing from the speakers.
Any advice??
Thanks,
M
Outputs:
squeezelite -n LR-NUC -s xxx.xxx.xxx.xxx -d all=debug
[20:27:20.414486] stream_init:290 init stream
[20:27:20.414608] stream_init:291 streambuf size: 2097152
[20:27:20.416789] output_init_alsa:889 init output
[20:27:20.416807] output_init_alsa:930 device : default requested alsa_buffer: 40 alsa_period: 4 format: any mmap: 1
[20:27:20.416823] output_init_common:346 outputbuf size: 3528000
[20:27:20.416871] output_init_common:370 idle timeout: 0
[20:27:20.417866] output_init_common:410 supported rates: 768000 705600 384000 352800 192000 176400 96000 88200 48000 44100
[20:27:20.424408] output_init_alsa:946 memory locked
[20:27:20.424612] output_thread:697 open output device: default
[20:27:20.424616] output_init_alsa:969 set output sched fifo rt: 45
[20:27:20.425248] alsa_open:367 opening device at: 44100
[20:27:20.425263] decode_init:129 init decode, include codecs: exclude codecs:
[20:27:20.425412] alsa_open:440 opened device default using format: S32_LE sample rate: 44100 mmap: 1
[20:27:20.425445] alsa_open:531 buffer: 40 period: 4 -> buffer size: 1764 period size: 441
[20:27:20.425834] load_faad:610 loaded libfaad.so.2
[20:27:20.425851] register_faad:640 using faad to decode aac
[20:27:20.426535] load_vorbis:300 loaded libvorbisfile.so.3
[20:27:20.426552] register_vorbis:329 using vorbis to decode ogg
[20:27:20.427141] load_flac:266 loaded libFLAC.so.8
[20:27:20.427158] register_flac:294 using flac to decode flc
[20:27:20.427173] register_pcm:424 using pcm to decode aif,pcm
[20:27:20.427475] load_mad:383 loaded libmad.so.0
[20:27:20.427503] register_mad:412 using mad to decode mp3
[20:27:20.427769] slimproto:849 connecting to xxx.xxx.xxx.xxx:3483
[20:27:20.428029] slimproto:882 connected
[20:27:20.428048] sendHELO:124 mac: 94:c6:91:1b:4d:22
[20:27:20.428091] sendHELO:126 cap: Model=squeezelite,AccuratePlayPoints=1,HasDigitalO ut=1,HasPolarityInversion=1,Firmware=v1.8.4 (R2),ModelName=SqueezeLite-R2,MaxSampleRate=768000,aac,ogg,flc,aif,pcm,mp3
[20:27:20.429616] process:494 strm
[20:27:20.429631] process_strm:256 strm command q
.....etc
systemctl status squeezelite@audiolinux
● squeezelite@audiolinux.service - Squeezelite Service
Loaded: loaded (/usr/lib/systemd/system/squeezelite@.service; enabled; vendor preset: disabled)
Active: active (running) since Sun 2018-11-11 20:32:06 CET; 2s ago
Main PID: 13967 (squeezelite)
Tasks: 4 (limit: 4915)
Memory: 6.7M
CGroup: /system.slice/system-squeezelite.slice/squeezelite@audiolinux.service
└─13967 /usr/bin/squeezelite -o front:CARD=U20F1,DEV=0
Nov 11 20:32:06 audiolinux systemd[1]: Started Squeezelite Service.
Squeezelite -l:
Output devices:
null - Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=U20F1 - USB Audio 2.0(F1), USB Audio - Default Audio Device
front:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - Front speakers
surround21:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 4.0 Surround output to Front and Rear speakers
surround41:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=U20F1,DEV=0 - USB Audio 2.0(F1), USB Audio - IEC958 (S/PDIF) Digital Audio Output
sysdefault:CARD=PCH - HDA Intel PCH, ALC233 Analog - Default Audio Device
front:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - Front speakers
surround21:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Analog - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=PCH,DEV=0 - HDA Intel PCH, ALC233 Digital - IEC958 (S/PDIF) Digital Audio Output
hdmi:CARD=PCH,DEV=0 - HDA Intel PCH, HDMI 0 - HDMI Audio Output
hdmi:CARD=PCH,DEV=1 - HDA Intel PCH, HDMI 1 - HDMI Audio Output
hdmi:CARD=PCH,DEV=2 - HDA Intel PCH, HDMI 2 - HDMI Audio Output
hdmi:CARD=PCH,DEV=3 - HDA Intel PCH, HDMI 3 - HDMI Audio Output
hdmi:CARD=PCH,DEV=4 - HDA Intel PCH, HDMI 4 - HDMI Audio Output
cat /proc/asound/modules
0 snd_usb_audio
1 snd_hda_intel
fuser -fv /dev/snd/* /dev/dsp*
Specified filename /dev/dsp* does not exist.
USER PID ACCESS COMMAND
/dev/snd/pcmC0D0p: audiolinux 10092 F...m squeezelite
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: U20F1 [USB Audio 2.0(F1)], device 0: USB Audio [USB Audio]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC233 Analog [ALC233 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC233 Digital [ALC233 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 10: HDMI 4 [HDMI 4]
Subdevices: 1/1
Subdevice #0: subdevice #0
